Envío Internacional

200090146

DIVEDEER Automatic Oil Press Machine Moringa Sunflower Seed Oil Extraction Making Machine Commercial Small Screw Peanut Sesame

Stock Disponible: 64 unidades

SKU: 3256808440834269

Color
Cantidad
1

$249.96

Precio final con envío
Envío gratis

Desglose de costo

Precio del producto
$243.25
Fee de Servicio MiCyberCompras
$6.71
Costo de envío estimado
Gratis
Costo Final Garantizado:
$249.96

El impuesto, si aplica, se confirma en el checkout según tu dirección. Aquí ves producto, fee y envío.

  • Envío EE.UU.: USPS / UPS Ground.

  • Costo Visible: Sin sorpresas ocultas.

  • Tracking Real: Alertas por SMS/Email.

  • Pago Seguro: Cifrado por Stripe.

¿Por qué elegir MiCyberCompras?

Atributos del productoBrand Name: DIVEDEER, Voltage: 220V, Origin: Mainland China, High-concerned chemical: none, Certification: CE, Model Number: B03S, voltage: 220V, Plug type: EU
Tamaño del paquete650×450×350 mm


Dear customer, you can read the following content before purchasing. It will be helpful for your choice and use.  Regarding cold pressing and hot pressing modes:Cold pressing refers to the process where materials are directly pressed without being heated.2. Hot pressing refers to the process where materials are heated to 60-80 degrees and then put into pressing.3. Whether cold pressing or hot pressing, our oil press must be preheated. Only when the pressing chamber is preheated to around 200 degrees Celsius can the oil be separated from the material. If the machine is not heated, the material will only be squeezed into a paste and the grease cannot be separated.4. Under the cold-pressing mode of the material, the normal temperature of the oil coming out is around 40° C, and the nutritional components will not be lost.Under the hot pressing mode of the material, the oil yield is higher, the oil will be more fragrant, and the oil output temperature is 60-80 degrees, during which some nutrients will be lost.  Therefore, the hot-pressing mode is generally suitable for pressing low-value edible oils such as rapeseed and peanuts, with the pursuit of oil yield and the aroma of stir-fried dishes. Cold pressing mode is generally suitable for pressing high-nutrition complementary food oils such as walnut oil, flaxseed oil, almond oil and olive oil, ensuring that nutrients are not lost.  Regarding the oil yield The actual oil yield will be affected by various factors such as the fullness of the material, local differences, and humidity, and will actually be lower than the data in the table. The oil yield is mainly determined by the material itself, just as we humans have different levels of fatness and thinness, and the fat content is also different. Our machines only differ in the pressing speed. No matter which model of machine it is, the oil yield of the pressing is the same. There are two ways to obtain pressed olive oil:The first one is to press olive kernels, which our machine can easily do.The second method is to press fresh olives. Whole oil olives are put into a large hydraulic press for pressing, and then the obtained olive juice is separated again. The process is rather complicated. This is not something that our household screw oil press can do.Therefore, our machine is only suitable for pressing olive kernels, not fresh olives.   Dear friend, there are many raw materials that we haven't seen or tested either. So basically The principle is:① The seeds of plants can generally be pressed② The pulp generally cannot be squeezed③ Flowers, leaves, roots and stems should not be pressed④ No part of an animal can be pressed⑤ For those with shells, remove the hard shells⑥ If the particles are too large, please process them into soybean-sized particles   For example, coconut meat:The coconut flesh needs to be dried in the sun and cut into small pieces, which can be used to extract oil.For example, avocado:1. The avocado kernels can be dried in the sun and cut into small pieces for oil extraction.2. The flesh of the avocado can be dried in the sun or baked in a microwave oven, or it can be pressed for oil.  If your oil press has pressing problems, it is very likely that 90% of them are caused by temperature issues. If the pressing chamber is not preheated and the pressing is carried out directly, the raw materials will not be exposed to high temperatures in the pressing chamber and thus cannot achieve oil and residue separation. Therefore, what comes out directly is paste. All oil presses must be preheated for 8 to 10 minutes, and the S series (large commercial) machines need to be preheated for 15 minutes. If it is a 110V voltage area, the preheating time should be doubled. Moreover, the pressing chamber and pressing rod should be installed, and the front cover should be lowered to ensure that the heater is in close contact with the pressing chamber.   Reference for the raw material temperatures we have tested1)Raw peanuts, 220-230 degrees2) Roasted peanuts, 180 to 200 degrees3) Raw and roasted white sesame seeds, 220 degrees4) Raw black sesame seeds, 200 degrees5) Roasted black sesame seeds, 230 degrees6) Walnut kernels, 180 degrees7) Flaxseeds, either raw or cooked, 190-200 degrees8) Rapeseed 180-200 degrees9) Sunflower kernels, Perilla seeds, 150 degrees10) Tea seed kernels, 100 degrees11) Almonds, 180 degrees12) Pumpkin seeds, 200 degrees



Productos Relacionados

Reseñas de Clientes

Aún no hay reseñas. Si compraste este producto, deja la primera.

Inicia sesión para dejar una reseña si ya compraste este producto.